Wataboard EX1 v3 (Complete Kit Refurbished)

(2 customer reviews)

From: $1,499.00

Occasionally we receive EX1 models on trade-in from customers who are upgrading to an EX2. These kits have been refurbished to be in like new condition and come complete ready to fly.


Made for Extreme Hydro-flight

  • #1 in Safety! Just pull the pin below your boots and you are instantly disconnected from the board.
  • #1 in Performance. You will fly in less than 10 minutes.

Comes complete with everything you need and ready to fly board. Just add water and your own boots/bindings. We recommend a jet ski with at least 120 HP but the more horsepower the better. This hydro-flight (flyboard) device will fit most jet skis or jet boats.

Product Code: 798304399561 SKU: WBX1-1 Category:
ProductQuantity

Jet Pump Adapter Plate

Included in this kit.

In stock

Jet Pump Type * 

Please select the jet ski brand that you will be using. Some Sea Doo models have a three bolts pattern which require a special spacer.

1

Hose (Standard)

Included in this kit. With standard U pipe. This item will be replaced if upgrading to the Pro hose.

In stock

1

Hose Barb Reducer

Included in this kit. Not needed if you are upgrading to a secondary swivel.

In stock

1

Swivel

Included in this kit.

In stock

1

Clamps (Set of 2) × 2

Included in this kit.

110-120
2

Clamps (Set of 2) × 2

Included in this kit.

120-130
2

Hose Suspension Cable

Included in this kit.

In stock

1

Power Flow System – optional

Unleash the full potential of your jet ski! Our newly redesigned U pipe has a 5 inch (127mm) inside bore. Compared to other competitors' 110mm U pipes ours has a 15% greater water flow. This results in huge performance improvement and virtually eliminates any back pressure and vibrations. Comes with a 5" (127mm) diameter 10 foot (3 m) long extension hose for even greater performance boost. Your jet ski will love you for it and so will your gas tank! 

  • Huge 5 inch inside bore for 15% more water flow.
  • Comes with 10 foot (3 meter) booster hose and a hose barb to connect to the main hose.
  • Incorporated quick disconnect pull pin system.
  • Tough aluminum construction.
  • Incorporated forward thrust nozzle for devices such as jetpacks and jetbikes.

In stock (can be backordered)

Swivel (for Power Flow System) – optional

This is a secondary swivel for the Power Flow System. It dramatically improves hose management and hose kinks. This is a fully assembled swivel with a quick disconnect system. This swivel will only fit Wataboard products.

In stock (can be backordered)

Quick Connect Steering Adaptor – optional

This plate utilizes your stock venturi with steering nozzle from your jet ski to make a steering adaptor. It lets you quickly switch from fly mode to jet ski mode. It quickly clamps on and off to the jet pump allowing you full steering capability. With this adaptor you won't need to reassemble your stock parts that you took off every time you want to use your jet ski for riding. Simply bolt on your existing stock reduction nozzle and steering nozzle to this plate.

NOTE: This item DOES NOT come with venturi and steering nozzle as seen in the illustrations. This item is designed to work with your existing venturi and steering nozzle that came off your PWC. For iBR SeaDoo models you will need a venturi with steering nozzle from non iBR SeaDoo jetski.

Hose (Professional) – optional

Pro rider hose.

Quick Disconnect Boot Clamps (set of 4) – optional

Quickly change boots sizes with these auto adjustable cam levers without any tools. You still have to thread these like the screws but you won't need any extra tools to carry with you in order to take them in and out. Package includes four quick disconnect cam levers.

Torlon Ball Bearings – optional

Torlon bearings are twice as hard as Delrin (standard bearings on all boards and swivel). They have a much higher wear resistance and will last much longer.

In stock

Only 1 left in stock (can be backordered)

Description

EX1 is what a flyboard water jet board should be. Wataboard EX1 fly board is everything you want in a water jet board and everything you didn’t know you wanted. Fits most Sea-Doo, Yamaha, Kawasaki, and Honda jet ski models. This model comes complete with everything you need for flyboarding. Just add water and your own boots/bindings.

Compare us to other brands

FeaturesEX1Others
Price$1499$5000+
Counter rotating nozzles with optional lockYesYes
Highest thrust to weight ratioYesYes
High quality 115mm diameter hoseYesX
Thrust booster systemYesX
Shockproof U pipeYesX
3rd axis Y manifold (available on EX2)XX
Made in USAYesX
2 year warrantyYesX

 

Additional information

Weight70 lbs
Dimensions27 × 20 × 17 in

Jet Pump Adapter Plate

Weight20 lbs
Dimensions10 × 10 × 4 in

Hose (Standard)

Weight50 lbs
Dimensions17 × 17 × 9 in

Swivel

Weight20 lbs
Swivel Version

Pre 2018 Models, Post 2018 Models

Clamps (Set of 2)

Weight8 lbs
Size

110-120

Clamps (Set of 2)

Weight8 lbs
Size

120-130

Hose Suspension Cable

Weight5 lbs

Power Flow System

Weight60 lbs
Dimensions24 × 18 × 15 in

Swivel (for Power Flow System)

Weight19 lbs

Quick Connect Steering Adaptor

Weight25 lbs
Jet Ski Connector

Honda, Kawasaki, Other, Sea Doo, Yamaha

Hose (Professional)

Weight50 lbs
Dimensions17 × 17 × 9 in

Quick Disconnect Boot Clamps (set of 4)

Weight10 lbs

Torlon Ball Bearings

Weight8 lbs
Type

Main Swivel, Secondary Swivel, Nozzles

2 reviews for Wataboard EX1 v3 (Complete Kit Refurbished)

  1. Craig Monteleone

    Used this weekend kids had great time. Wataboard hooked up to Yamaha fxho lifted a 250 pound man out of water at about 5500 rpm. Great unit and Mel is awesome to deal with.

  2. Yuu S. (verified owner)

    The price is very good! Product is easy to use. I can’t wait to use it.

Only logged in customers who have purchased this product may leave a review.

You may also like…