ProductQuantity

Jet Pump Universal Adapter Plate

Jet pump interface plate is often called the Universal Adapter Plate. This plate attaches to the PWC and allows the connection of the U Pipe. Some Sea Doo models have a 3-bolt pump pattern. These models are listed below. Also, this will NOT fit Sea Doo Spark or 2017+ Yamaha EX/EXR.

Sea Doo models with a 3-bolt pump pattern are listed below. Please note this is not a complete list. Check your jet ski to make sure. If the exit nozzle attaches to the pump with three bolts then you have the 3-bolt pattern.

  • 2010/2011     GTX all
  • 2010,11,14     RXT all
  • 2010/2011     Wake 215 only
  • 2009              RXT IS 255 only
  • 2009              GTX Limited IS 255 only
1

Swivel (for Power Flow System)

This is a secondary swivel for the Power Flow System. It connects to the booster hose in front of the jetski. With this extra swivel you will be able to connect/disconnect the main hose at the front of the jetski. It dramatically improves hose management and hose kinks. This is a fully assembled swivel with a quick disconnect system. This swivel will only fit Wataboard products.

1

In stock (can be backordered)

Power Flow System

(2 customer reviews)

From: $799.00

Unleash the full potential of your jet ski! Our newly redesigned U pipe has a 5 inch (127mm) inside bore. Compared to other competitors’ 110mm U pipes ours has a 15% greater water flow. This results in huge performance improvement and virtually eliminates any back pressure and vibrations. Comes with a 5″ (127mm) diameter 10 foot (3 m) long extension hose for even greater performance boost. Your jet ski will love you for it and so will your gas tank! 

  • Huge 5 inch inside bore for 15% more water flow.
  • Comes with 10 foot (3 meter) booster hose and a hose barb to connect to the main hose.
  • Incorporated quick disconnect pull pin system.
  • Tough aluminum construction.
  • Incorporated forward thrust nozzle for devices such as jetpacks and jetbikes.
Product Code: N/A SKU: UPV2 Category:
ProductQuantity

Jet Pump Universal Adapter Plate

Jet pump interface plate is often called the Universal Adapter Plate. This plate attaches to the PWC and allows the connection of the U Pipe. Some Sea Doo models have a 3-bolt pump pattern. These models are listed below. Also, this will NOT fit Sea Doo Spark or 2017+ Yamaha EX/EXR.

Sea Doo models with a 3-bolt pump pattern are listed below. Please note this is not a complete list. Check your jet ski to make sure. If the exit nozzle attaches to the pump with three bolts then you have the 3-bolt pattern.

  • 2010/2011     GTX all
  • 2010,11,14     RXT all
  • 2010/2011     Wake 215 only
  • 2009              RXT IS 255 only
  • 2009              GTX Limited IS 255 only
1

Swivel (for Power Flow System)

This is a secondary swivel for the Power Flow System. It connects to the booster hose in front of the jetski. With this extra swivel you will be able to connect/disconnect the main hose at the front of the jetski. It dramatically improves hose management and hose kinks. This is a fully assembled swivel with a quick disconnect system. This swivel will only fit Wataboard products.

1

In stock (can be backordered)

Unleash the full potential of your jet ski! Our newly redesigned U pipe has a 5 inch (127mm) inside bore. Compared to other competitors' 110mm U pipes ours has a 15% greater water flow. This results in huge performance improvement and virtually eliminates any back pressure and vibrations. Comes with a 5" (127mm) diameter 10 foot (3 m) long extension hose for even greater performance boost. Your jet ski will love you for it and so will your gas tank! 

  • Huge 5 inch inside bore for 15% more water flow.
  • Comes with 10 foot (3 meter) booster hose and a hose barb to connect to the main hose.
  • Incorporated quick disconnect pull pin system.
  • Tough aluminum construction.
  • Incorporated forward thrust nozzle for devices such as jetpacks and jetbikes.

Additional information

Weight60 lbs
Dimensions24 × 18 × 15 in

Jet Pump Universal Adapter Plate

Weight20 lbs
Dimensions10 × 10 × 4 in

Swivel (for Power Flow System)

Weight20 lbs

2 reviews for Power Flow System

  1. Joe Garza

    I must say this is a huge improvement over the standard U pipes I’ve used. I’m very happy with my purchase.

    1 product
  2. dave fanfarillo (verified owner)

    This is an awesome product and a must have to get the max out of your ski. I added at least 5 ft maybe 8 ft to my flight altitude. No more back pressure vibration or as my wife would say, “grinding noise”. Can get the full RPM out of my ’08 RXP-X 255. Lift is super fast. Thanks Mel, you hit a home run with this feature.

    1 product
Add a review

Your email address will not be published. Required fields are marked *