Wataboard EX2 Pro (Complete Kit) – no flyboard comes close!

(10 customer reviews)

From: $2,999.00

Made in the USA for Extreme Hydroflight. If you want the “Best Of The Best” this is the model for you!

  • #1 in Safety! Just pull the pin below your boots and you are instantly disconnected from the board.
  • #1 in Performance. You will fly in less than 10 minutes.
  • This kit comes complete with everything you need for flyboarding. Just add water and your own wakeboard boots.

EX2 is the big brother of the EX1. It is designed for even more fun. The flexible 3rd axis virtually eliminates hose tugging and swaying. It allows for extra tricks that are not possible with a solid Y manifold. This hydro-flight (flyboard) device will fit most jet boats, Sea-Doo, Yamaha Waverunner, Kawasaki, and Honda jet ski models.


 Want to save $150 on shipping? Add the Swivel (for Power Flow System) below to your cart and get FREE shipping on your entire order (in USA Mainland only)
Product Code: 767870199691 SKU: 767870199691 Categories: ,

cool Items with $0.00 are included in this kit.

Jet Pump Universal Adapter Plate

Jet pump interface plate is often called the Universal Adapter Plate. This plate attaches to the PWC and allows the connection of the U Pipe. Some Sea Doo models have a 3-bolt pump pattern and will require an additional adapter.

Sea Doo models with 3 bolt pump:

  • 2010/2011     Sea Doo GTX all
  • 2010,11,14    Sea Doo RXT all
  • 2010/2011     Sea Doo Wake 215 only
  • 2009             Sea Doo RXT IS 255 only
  • 2009             Sea Doo GTX Limited IS 255 only
Below models are NOT compatible with Wataboard
  • All years Sea Doo Spark
  • 2017+ Yamaha EX/EXR
$0.00

In stock

What is your jet ski type? *

Please select the jet ski brand that you will be using.

Swivel

This swivel will allow the hose to untwist itself as you perform various maneuvers while flying. Assembled swivel with o-rings and double row ball bearings. Double row ball bearings insure super smooth rotation even at 50 feet above water. This swivel will only fit Wataboard products manufactured in 2018 to present.

$0.00

In stock

Hose (Standard)

This is the standard 4.5" (115mm) diameter, canvas on the outside, rubber inside hose.

$0.00

In stock

45 feet is recommended for jet skies that are less then 200 horsepower. 59 feet is recommended for jet skies over 200 HP.

Power Flow System

Unleash the full potential of your jet ski! Our newly redesigned U pipe has a 5 inch (127mm) inside bore. Compared to other competitors' 110mm U pipes ours has a 15% greater water flow. This results in huge performance improvement and virtually eliminates any back pressure and vibrations. Comes with a 5" (127mm) diameter 10 foot (3 m) long extension hose for even greater performance boost. Your jet ski will love you for it and so will your gas tank!

$0.00

Only 9 left in stock

Swivel (for Power Flow System)

This is a secondary swivel for the Power Flow System. It connects to the booster hose in front of the jetski. With this extra swivel you will be able to connect/disconnect the main hose at the front of the jetski. It dramatically improves hose management and hose kinks. This is a fully assembled swivel with a quick disconnect system.

Quick Connect Steering Adaptor

Want to go back to jet skiing and back to flying in one minute? Then you need a Quick Connect Steering Adapter. This adapter converts  your stock venturi with steering nozzle from your jet ski to make a quick connect/disconnect steering adaptor. It lets you quickly switch from fly mode to jet ski mode. It quickly clamps on and off to the jet pump just like the U pipe allowing you full steering capability. With this adaptor you won't need to reassemble your stock parts that you took off every time you want to use your jet ski for riding. Simply bolt on your existing stock reduction nozzle and steering nozzle to this plate.

Attention!
This item DOES NOT come with venturi and steering nozzle as seen in the illustrations. This item is designed to work with your existing venturi and steering nozzle that came off your PWC. For iBR Sea Doo models you will need a venturi with steering nozzle from non iBR SeaDoo jetski. For Kawasaki Ultra 300/310 you will need a nozzle from a model other than Ultra.

Torlon Ball Bearings

Torlon bearings are twice as hard as Delrin (standard bearings on all boards and swivel). They have a much higher wear resistance and will last much longer.

In stock (can be backordered)

EX2 flyboard is the big brother of the EX1. It is designed for even more fun. The flexible 3rd axis virtually eliminates hose tugging and swaying. It allows for extra tricks that are not possible with a solid Y manifold. Fits most Sea-Doo, Yamaha Waverunner, Kawasaki, and Honda jet ski models. This model comes complete with everything you need for flyboarding. Just add water and your own boots/bindings.

 

Compare us to other brands

  • Lock/Unlock Counter rotating nozzles
  • Highest thrust to weight ratio
  • High quality 115mm diameter hose
  • Thrust booster system
  • U pipe (Power Flow System)
  • 3rd axis Y manifold
  • Made in USA
  • 2 Year warranty

No other brand can offer the same features.

Additional information

Weight110 lbs
Dimensions36 × 18 × 12 in

Swivel

Swivel Version

Pre 2018 Models, Post 2018 Models

Quick Connect Steering Adaptor

Jet Ski Connector

Honda, Kawasaki, Sea Doo, Sea Doo 3 Bolt (not common), Yamaha

Torlon Ball Bearings

Type

Main Swivel, Secondary Swivel, Nozzles

10 reviews for Wataboard EX2 Pro (Complete Kit) – no flyboard comes close!

  1. Josh Cregg

    All I can say is AWASOME! This board is the best I have used. Hose tugging is completely absorbed when doing tricks. I highly recommend it.

    1 product
  2. Shaun Thomas (verified owner)

    Love this board!! I can’t compare it to any other commercially available board as this is the only one I have ridden, but WOW! Flying is super easy and very stable. We have had tons of adults and children fly. The only reason I didn’t give 5 stars was due to a premature “y” hose failure, but Mel was very helpful and quick to resolve the issue. His customer service is excellent.

    1 product
  3. Lee Steele

    I love this board soooooo much more than my original. It is so smooth I can’t believe it.

  4. John Grim

    Ever since I purchase my ex2 we’ve been out on the lake every weekend. Thanks Mel for such great support. Keep up the good work.

    1 product
  5. Brett W.

    I owned a Flyboard and a Jetblade. The EX2 blows them away!!! The smoothest ride and great quality. I’ve already sent you guys a few customers.

    1 product
  6. David F. (verified owner)

    This board is incredible! There’s nothing out there that’s even close. Thanks Mel for all your help.

    1 product
  7. Steve Rails (verified owner)

    I traded up from the ex1 to this board and I’m glad I did. No complaints here.

    1 product
  8. Chris Cook

    There is nothing on the market like this board. I’ve owned a Flyboard by Zapata before I purchase a Wataboard and I am truly impressed by this model. Mel, thanks for such awesome support!!!!

    1 product
    • Mel

      Thank you for your review!

  9. Geoff

    This thing rocks. Tons of people around me when I’m flying.

    1 product
  10. Mike G.

    Hey Mal thanks for the awesome service! I’ll tell everyone I know about your product.

Add a review

Your email address will not be published. Required fields are marked *