Wataboard EX2 Pro (Complete Kit) 1

Jet Pump Universal Adapter Plate

Jet pump interface plate is often called the Universal Adapter Plate. This plate attaches to the PWC and allows the connection of the U Pipe. Some Sea Doo models have a 3-bolt pump pattern. These models are listed below. Also, this will NOT fit Sea Doo Spark or Yamaha EX/EXR.

Sea Doo models with a 3-bolt pump pattern are listed below. Please note this is not a complete list. Check your jet ski to make sure. If the exit nozzle attaches to the pump with three bolts then you have the 3-bolt pattern.

  • 2010/2011     GTX all
  • 2010,11,14     RXT all
  • 2010/2011     Wake 215 only
  • 2009              RXT IS 255 only
  • 2009              GTX Limited IS 255 only
$299.00 $0.00

In stock

What is your jet ski type? * 

Please select the jet ski brand that you will be using.

Wataboard EX2 Pro (Complete Kit) 2

Power Flow System

Unleash the full potential of your jet ski! Our newly redesigned U pipe has a 5 inch (127mm) inside bore. Compared to other competitors' 110mm U pipes ours has a 15% greater water flow. This results in huge performance improvement and virtually eliminates any back pressure and vibrations. Comes with a 5" (127mm) diameter 10 foot (3 m) long extension hose for even greater performance boost. Your jet ski will love you for it and so will your gas tank! 

  • Huge 5 inch inside bore for 15% more water flow.
  • Comes with 10 foot (3 meter) booster hose and a hose barb to connect to the main hose.
  • Incorporated quick disconnect pull pin system.
  • Tough aluminum construction.
  • Incorporated forward thrust nozzle for devices such as jetpacks and jetbikes.
$799.00 $0.00

In stock (can be backordered)

Wataboard EX2 Pro (Complete Kit) 3

Swivel (for Power Flow System)

This is a secondary swivel for the Power Flow System. It connects to the booster hose in front of the jetski. With this extra swivel you will be able to connect/disconnect the main hose at the front of the jetski. It dramatically improves hose management and hose kinks. This is a fully assembled swivel with a quick disconnect system. This swivel will only fit Wataboard products.

Wataboard EX2 Pro (Complete Kit) 4

Quick Connect Steering Adaptor

Want to go back to jet skiing and back to flying in one minute? Then you need a Quick Connect Steering Adapter. This adapter converts  your stock venturi with steering nozzle from your jet ski to make a quick connect/disconnect steering adaptor. It lets you quickly switch from fly mode to jet ski mode. It quickly clamps on and off to the jet pump just like the U pipe allowing you full steering capability. With this adaptor you won't need to reassemble your stock parts that you took off every time you want to use your jet ski for riding. Simply bolt on your existing stock reduction nozzle and steering nozzle to this plate.

NOTE: This item DOES NOT come with venturi and steering nozzle as seen in the illustrations. This item is designed to work with your existing venturi and steering nozzle that came off your PWC. For iBR SeaDoo models you will need a venturi with steering nozzle from non iBR SeaDoo jetski.

Wataboard EX2 Pro (Complete Kit) 5

Hose (Professional)

Better than any "Pro" hose out there! That's right, nothing comes close. It is even better than X-Armor. This hose is specifically designed for ultra performance. This 115mm diameter, 60 foot (20 meter) long hose is a pro rider's dream. If you need a hose that is virtually indestructible, this is it.

This hose is PU line inside and out and through the weave. It is guaranteed not to rip or delineate. The inside PU lining also increases water flow by 15% so you feel the extra thrust under our feet.

Wataboard EX2 Pro (Complete Kit) 6

Quick Disconnect Boot Clamps (set of 4)

Quickly change boots sizes with these auto adjustable cam levers without any tools. You still have to thread these like the screws but you won't need any extra tools to carry with you in order to take them in and out. Package includes four quick disconnect cam levers.

Wataboard EX2 Pro (Complete Kit) 7

Torlon Ball Bearings

Torlon bearings are twice as hard as Delrin (standard bearings on all boards and swivel). They have a much higher wear resistance and will last much longer.

Sale!
Wataboard EX2 flyboard kit
Wataboard EX2 Pro (Complete Kit) 8
Wataboard EX2 Pro (Complete Kit) 9
Wataboard EX2 Pro (Complete Kit) 10
Wataboard EX2 Pro (Complete Kit) 11
Wataboard EX2 Pro (Complete Kit) 12

Wataboard EX2 Pro (Complete Kit)

(4 customer reviews)

From: $5,097.00 $2,999.00

Made for Extreme Hydroflight. If you want the “Best Of The Best” this is the model for you!

  • #1 in Safety! Just pull the pin below your boots and you are instantly disconnected from the board.
  • #1 in Performance. You will fly in less than 10 minutes.

EX2 is the big brother of the EX1. It is designed for even more fun. The flexible 3rd axis virtually eliminates hose tugging and swaying. It allows for extra tricks that are not possible with a solid Y manifold. This hydro-flight (flyboard) device will fit most jet boats, Sea-Doo, Yamaha Waverunner, Kawasaki, and Honda jet ski models. This kit comes complete with everything you need for flyboarding. Just add water and your own boots/bindings.

Product Code: 767870199691 SKU: 767870199691 Categories: ,
Wataboard EX2 Pro (Complete Kit) 13

Jet Pump Universal Adapter Plate

Jet pump interface plate is often called the Universal Adapter Plate. This plate attaches to the PWC and allows the connection of the U Pipe. Some Sea Doo models have a 3-bolt pump pattern. These models are listed below. Also, this will NOT fit Sea Doo Spark or Yamaha EX/EXR.

Sea Doo models with a 3-bolt pump pattern are listed below. Please note this is not a complete list. Check your jet ski to make sure. If the exit nozzle attaches to the pump with three bolts then you have the 3-bolt pattern.

  • 2010/2011     GTX all
  • 2010,11,14     RXT all
  • 2010/2011     Wake 215 only
  • 2009              RXT IS 255 only
  • 2009              GTX Limited IS 255 only
$299.00 $0.00

In stock

What is your jet ski type? * 

Please select the jet ski brand that you will be using.

Wataboard EX2 Pro (Complete Kit) 14

Power Flow System

Unleash the full potential of your jet ski! Our newly redesigned U pipe has a 5 inch (127mm) inside bore. Compared to other competitors' 110mm U pipes ours has a 15% greater water flow. This results in huge performance improvement and virtually eliminates any back pressure and vibrations. Comes with a 5" (127mm) diameter 10 foot (3 m) long extension hose for even greater performance boost. Your jet ski will love you for it and so will your gas tank! 

  • Huge 5 inch inside bore for 15% more water flow.
  • Comes with 10 foot (3 meter) booster hose and a hose barb to connect to the main hose.
  • Incorporated quick disconnect pull pin system.
  • Tough aluminum construction.
  • Incorporated forward thrust nozzle for devices such as jetpacks and jetbikes.
$799.00 $0.00

In stock (can be backordered)

Wataboard EX2 Pro (Complete Kit) 15

Swivel (for Power Flow System)

This is a secondary swivel for the Power Flow System. It connects to the booster hose in front of the jetski. With this extra swivel you will be able to connect/disconnect the main hose at the front of the jetski. It dramatically improves hose management and hose kinks. This is a fully assembled swivel with a quick disconnect system. This swivel will only fit Wataboard products.

Wataboard EX2 Pro (Complete Kit) 16

Quick Connect Steering Adaptor

Want to go back to jet skiing and back to flying in one minute? Then you need a Quick Connect Steering Adapter. This adapter converts  your stock venturi with steering nozzle from your jet ski to make a quick connect/disconnect steering adaptor. It lets you quickly switch from fly mode to jet ski mode. It quickly clamps on and off to the jet pump just like the U pipe allowing you full steering capability. With this adaptor you won't need to reassemble your stock parts that you took off every time you want to use your jet ski for riding. Simply bolt on your existing stock reduction nozzle and steering nozzle to this plate.

NOTE: This item DOES NOT come with venturi and steering nozzle as seen in the illustrations. This item is designed to work with your existing venturi and steering nozzle that came off your PWC. For iBR SeaDoo models you will need a venturi with steering nozzle from non iBR SeaDoo jetski.

Wataboard EX2 Pro (Complete Kit) 17

Hose (Professional)

Better than any "Pro" hose out there! That's right, nothing comes close. It is even better than X-Armor. This hose is specifically designed for ultra performance. This 115mm diameter, 60 foot (20 meter) long hose is a pro rider's dream. If you need a hose that is virtually indestructible, this is it.

This hose is PU line inside and out and through the weave. It is guaranteed not to rip or delineate. The inside PU lining also increases water flow by 15% so you feel the extra thrust under our feet.

Wataboard EX2 Pro (Complete Kit) 18

Quick Disconnect Boot Clamps (set of 4)

Quickly change boots sizes with these auto adjustable cam levers without any tools. You still have to thread these like the screws but you won't need any extra tools to carry with you in order to take them in and out. Package includes four quick disconnect cam levers.

Wataboard EX2 Pro (Complete Kit) 19

Torlon Ball Bearings

Torlon bearings are twice as hard as Delrin (standard bearings on all boards and swivel). They have a much higher wear resistance and will last much longer.

EX2 flyboard is the big brother of the EX1. It is designed for even more fun. The flexible 3rd axis virtually eliminates hose tugging and swaying. It allows for extra tricks that are not possible with a solid Y manifold. Fits most Sea-Doo, Yamaha Waverunner, Kawasaki, and Honda jet ski models. This model comes complete with everything you need for flyboarding. Just add water and your own boots/bindings.

Compare us to other brands

FeaturesEX1EX2Other brands
Price$1999$2999$5000+
Counter rotating nozzles with optional lockYesYesYes
Highest thrust to weight ratioYesYesYes
High quality 115mm diameter hoseYesYesX
Thrust booster systemYesYesX
Shockproof U pipeYesYesX
3rd axis Y manifoldXYesX
Made in USAYesYesX
2 year warrantyYesYesX

Additional information

Weight110 lbs
Dimensions27 × 20 × 17 in

Jet Pump Universal Adapter Plate

Weight20 lbs
Dimensions10 × 10 × 4 in

Power Flow System

Weight60 lbs
Dimensions24 × 18 × 15 in

Swivel (for Power Flow System)

Weight19 lbs

Quick Connect Steering Adaptor

Weight25 lbs
Jet Ski Connector

Honda, Kawasaki, Sea Doo, Sea Doo 3 Bolt (not common), Yamaha

Hose (Professional)

Weight50 lbs
Dimensions17 × 17 × 9 in

Quick Disconnect Boot Clamps (set of 4)

Weight10 lbs

Torlon Ball Bearings

Weight8 lbs
Type

Main Swivel, Secondary Swivel, Nozzles

Share your thoughts!

4.75 out of 5 stars

4 reviews

5 3
4 1
3 0
2 0
1 0

Let us know what you think...

Leave a Review Ask a Question Post a Video Post a Photo

What others are saying

  1. Josh Cregg

    Josh Cregg –

    All I can say is AWASOME! This board is the best I have used. Hose tugging is completely absorbed when doing tricks. I highly recommend it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Shaun Thomas

    Shaun Thomas (verified owner) –

    Love this board!! I can’t compare it to any other commercially available board as this is the only one I have ridden, but WOW! Flying is super easy and very stable. We have had tons of adults and children fly. The only reason I didn’t give 5 stars was due to a premature “y” hose failure, but Mel was very helpful and quick to resolve the issue. His customer service is excellent.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Lee Steele

    I love this board

    Lee Steele –

    I love this board soooooo much more than my original. It is so smooth I can’t believe it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. John Grim

    Incredible fun

    John Grim –

    Ever since I purchase my ex2 we’ve been out on the lake every weekend. Thanks Mel for such great support. Keep up the good work.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Continue as a Guest

Continue as a Guest

Related products