Sale!

Wataboard EX1 v3 (Complete Kit Refurbished)

(3 customer reviews)

From: $1,699.00

Occasionally we receive EX1 models on trade-in from customers who are upgrading to an EX2. These kits have been refurbished to be in almost perfect condition (80% new components, may have a few blemishes cosmetically) and come complete ready to fly. Fits most Sea-Doo, Yamaha Waverunner, Kawasaki, and Honda jet ski models.


Made for Extreme Hydro-flight

  • #1 in Safety! Just pull the pin below your boots and you are instantly disconnected from the board.
  • #1 in Performance. You will fly in less than 10 minutes.

This kit comes complete with everything you need and ready to fly board. Just add water and your own boots/bindings. We recommend a jet ski with at least 120 HP but the more horsepower the better. This hydro-flight (flyboard) device will fit most jet skis or jet boats.

Product Code: 798304399561 SKU: WBX1-1 Categories: ,

Jet Pump Universal Adapter Plate

Jet pump interface plate is often called the Universal Adapter Plate. This plate attaches to the PWC and allows the connection of the U Pipe. Some Sea Doo models have a 3-bolt pump pattern. These models are listed below. Also, this will NOT fit Sea Doo Spark or 2017+ Yamaha EX/EXR.

Sea Doo models with a 3-bolt pump pattern are listed below. Please note this is not a complete list. Check your jet ski to make sure. If the exit nozzle attaches to the pump with three bolts then you have the 3-bolt pattern.

  • 2010/2011     GTX all
  • 2010,11,14     RXT all
  • 2010/2011     Wake 215 only
  • 2009              RXT IS 255 only
  • 2009              GTX Limited IS 255 only
$0.00

In stock

What is your jet ski type? * 

Please select the jet ski brand that you will be using.

Swivel (for Power Flow System)

This is a secondary swivel for the Power Flow System. It connects to the booster hose in front of the jetski. With this extra swivel you will be able to connect/disconnect the main hose at the front of the jetski. It dramatically improves hose management and hose kinks. This is a fully assembled swivel with a quick disconnect system. This swivel will only fit Wataboard products.

Quick Connect Steering Adaptor

Want to go back to jet skiing and back to flying in one minute? Then you need a Quick Connect Steering Adapter. This adapter converts  your stock venturi with steering nozzle from your jet ski to make a quick connect/disconnect steering adaptor. It lets you quickly switch from fly mode to jet ski mode. It quickly clamps on and off to the jet pump just like the U pipe allowing you full steering capability. With this adaptor you won't need to reassemble your stock parts that you took off every time you want to use your jet ski for riding. Simply bolt on your existing stock reduction nozzle and steering nozzle to this plate.

ATTENTION! This item DOES NOT come with venturi and steering nozzle as seen in the illustrations. This item is designed to work with your existing venturi and steering nozzle that came off your PWC. For iBR Sea Doo models you will need a venturi with steering nozzle from non iBR SeaDoo jetski.

Hose (Professional)

Better than any "Pro" hose out there! That's right, nothing comes close. It is even better than X-Armor. This hose is specifically designed for ultra performance. This 115mm diameter, 59 foot (18 meter) long hose is a pro rider's dream. If you need a hose that is virtually indestructible, this is it.

This hose is PU line inside and out and through the weave. It is guaranteed not to rip or delineate. The inside PU lining also increases water flow by 15% so you feel the extra thrust under our feet.

Torlon Ball Bearings

Torlon bearings are twice as hard as Delrin (standard bearings on all boards and swivel). They have a much higher wear resistance and will last much longer.

Only 1 left in stock

EX1 is what a flyboard water jet board should be. Wataboard EX1 fly board is everything you want in a water jet board and everything you didn't know you wanted. Fits most Sea-Doo, Yamaha Waverunner, Kawasaki, and Honda jet ski models. This model comes complete with everything you need for flyboarding. Just add water and your own boots/bindings.

Compare us to other brands

FeaturesEX1EX2Other brands
Price$1999$2999$5000+
Counter rotating nozzles with optional lockYesYesYes
Highest thrust to weight ratioYesYesYes
High quality 115mm diameter hoseYesYesX
Thrust booster systemYesYesX
Shockproof U pipeYesYesX
3rd axis Y manifoldXYesX
Made in USAYesYesX
2 year warrantyYesYesX

Additional information

Weight110 lbs
Dimensions27 × 20 × 17 in

Jet Pump Universal Adapter Plate

Weight20 lbs
Dimensions10 × 10 × 4 in

Swivel (for Power Flow System)

Weight20 lbs

Quick Connect Steering Adaptor

Weight25 lbs
Jet Ski Connector

Honda, Kawasaki, Sea Doo, Sea Doo 3 Bolt (not common), Yamaha

Hose (Professional)

Weight50 lbs
Dimensions17 × 17 × 9 in

Torlon Ball Bearings

Weight8 lbs
Type

Main Swivel, Secondary Swivel, Nozzles

3 reviews for Wataboard EX1 v3 (Complete Kit Refurbished)

  1. Craig Monteleone

    Used this weekend kids had great time. Wataboard hooked up to Yamaha fxho lifted a 250 pound man out of water at about 5500 rpm. Great unit and Mel is awesome to deal with.

    1 product
  2. Yuu S. (verified owner)

    The price is very good! Product is easy to use. I can’t wait to use it.

  3. Brad Ngo

    This flyboard is so much fun!!! For being refurbished it is perfect in a every way. Great quality!

    1 product
Add a review

Your email address will not be published. Required fields are marked *