$499.00
Want to go back to jet skiing and back to flying in one minute? Then you need a Quick Connect Steering Adapter. This adapter converts your stock venturi with steering nozzle from your jet ski to make a quick connect/disconnect steering adaptor. It lets you quickly switch from fly mode to jet ski mode. It quickly clamps on and off to the jet pump just like the U pipe allowing you full steering capability. With this adaptor you won’t need to reassemble your stock parts that you took off every time you want to use your jet ski for riding. Simply bolt on your existing stock reduction nozzle and steering nozzle to this plate.
In stock
This adaptor plate lets you quickly switch from fly mode to jet ski mode. It quickly clamps on and off to the jet pump allowing you full steering capability. With this adaptor you won’t need to reassemble your stock parts that you took off every time you want to use your jet ski for riding. Simply bolt on your existing stock reduction nozzle and steering nozzle to this adaptor.
| Weight | 25 lbs |
|---|---|
| Jet Ski Connector | Honda, Kawasaki, Sea Doo, Sea Doo 3 Bolt (not common), Yamaha |
Mike (verified owner) –
Can I use my Seadoo jetboat with this and keep my reverse gate?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mel –
Hi Mike, yes you can but not on all boats. Make sure you have at least 10 inches of clearance between your stock exit nozzle/venturi and the reverse gate. And make sure that the reverse is not attached to the same bracket as the steering nozzle.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal