Shop | My Account | Warranty | Support | Contact

Boat Adapter 1

Boat Adapter

From: $599.00

This is a special exit jet nozzle that allows for hose connection direct tot the pump without the use of a U redirect system. The benefit of using this adaptor is that you can be farther away from the boat because the hose is not under the boat redirecting to the front. This nozzle comes with a quick disconnect plunger pin system just like the U pipe.

Product Code: N/A SKU: WCN1 Category:
Jet Pump Universal Adapter Plate 2

Jet Pump Universal Adapter Plate

Jet pump interface plate is often called the Universal Adapter Plate. This plate attaches to the PWC and allows the connection of the U Pipe. Some Sea Doo models have a 3-bolt pump pattern. These models are listed below. Also, this will NOT fit Sea Doo Spark or Yamaha EX/EXR.

Sea Doo models with a 3-bolt pump pattern are listed below. Please note this is not a complete list. Check your jet ski to make sure. If the exit nozzle attaches to the pump with three bolts then you have the 3-bolt pattern.

  • 2010/2011     GTX all
  • 2010,11,14     RXT all
  • 2010/2011     Wake 215 only
  • 2009              RXT IS 255 only
  • 2009              GTX Limited IS 255 only

Available on backorder

This is a special exit jet nozzle that allows for hose connection direct tot the pump without the use of a U redirect system. The benefit of using this adaptor is that you can be farther away from the boat because the hose is not under the boat redirecting to the front. This nozzle comes with a quick disconnect plunger pin system just like the U pipe.

Additional information

Weight6 lbs
Type

Kawasaki, Sea Doo, Yamaha

Jet Pump Universal Adapter Plate

Weight20 lbs
Dimensions10 × 10 × 4 in

Share your thoughts!

Let us know what you think...

Leave a Review Ask a Question Post a Video Post a Photo

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Continue as a Guest

Related products